Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Fog Light Bulb on the Fiat Grande Punto

Model: Fiat Punto MK 3, Punto EVO, 199, Grandepunto - Years 2005-2018
Part: Fog lights

This guide shows how to replace the fog light bulb on the Fiat Grande Punto. The bulb replacement is very simple as you need to disconnect the power cable from the light and remove the bulb after moving the two retaining screws. Removing the fog light is also straightforward, as you need to unscrew the three fixing screws of the element to free it from the bodywork. Just push it back and down to facilitate its removal. At the bottom of the vehicle, there are two recesses in the wheel arch, corresponding to the fog lights, to allow easier removal.

Updated on 23 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Removing Fog Light with Bulb from a Fiat Grande Punto Evo
Removing Fog Light with Bulb from a Fiat Grande Punto Evo
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) In this video, learn how to remove the fog light with bulb from a Fiat Grande Punto Evo. Start by removing the plastic grille frame around the side f…
Replacing the Fog Light Bulbs on a Grande Punto
Replacing the Fog Light Bulbs on a Grande Punto
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) How to dismantle the front fog light on a Grande Punto? Lift the front bonnet to access the headlights. Remove the plastic cover at the bottom of the…
How to Replace the Fog Light Bulb on a Fiat Grande Punto
How to Replace the Fog Light Bulb on a Fiat Grande Punto
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) Replace the fog light bulbs if they are blown. Here’s how to replace them from the fog light. Remove the plastic cover at the bottom of the bumper us…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos