Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace Fog Light on Fiat Grande Punto

Model: Fiat Punto 199, MK 3, Grandepunto , Punto EVO - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
Part: Fog lights

See other generations:
Video tutorial

Is the fog light damaged? Here's how to change it on a Grande Punto. Unscrew the fastening screw of the fog light's plastic cover (at the front of the bumper and at the back), then, remove it with a lever from the bumper.

Once the plastic is removed, unscrew the screws of the fog light and pull it out from the car's bumper (disconnect the power cable). Fit the new unit with a new bulb (same size and voltage) into the fog light holder.

Screw all the fastening screws back in. Test the correct operation of the fog light with the control switches.


Updated on 18 March 2026 by ScegliAuto


Related tutorials

Removing Fog Light with Bulb from a Fiat Grande Punto Evo
Removing Fog Light with Bulb from a Fiat Grande Punto Evo
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) In this video, learn how to remove the fog light with bulb from a Fiat Grande Punto Evo. Start by removing the plastic grille frame around the side f…
Replacing the Fog Light Bulbs on a Grande Punto
Replacing the Fog Light Bulbs on a Grande Punto
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) How to dismantle the front fog light on a Grande Punto? Lift the front bonnet to access the headlights. Remove the plastic cover at the bottom of the…
How to Replace the Fog Light Bulb on a Fiat Grande Punto
How to Replace the Fog Light Bulb on a Fiat Grande Punto
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) Replace the fog light bulbs if they are blown. Here’s how to replace them from the fog light. Remove the plastic cover at the bottom of the bumper us…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos