Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Front Fog Light Bulbs on a Fiat Punto

Model: Fiat Punto MK 2, 188 - Years 1999-2011
Part: Fog lights

In this video tutorial, you will see how to remove and replace the front fog light bulbs on a Fiat Punto, following these simple steps. First, lift the vehicle and start unscrewing the fixing screws found under the front bumper, including those located in the wheel arch. Then, gently unclip the bumper at the sides and remove the front light, as shown in the video. At this point, disconnect the electrical connector to access the bulbs, unclipping the metal spring to remove and replace the front fog light bulb!

Updated on 22 May 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Fog Light Bulbs on a Grande Punto
Replacing the Fog Light Bulbs on a Grande Punto
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) How to dismantle the front fog light on a Grande Punto? Lift the front bonnet to access the headlights. Remove the plastic cover at the bottom of the…
How to Replace the Fog Light Bulb on a Fiat Grande Punto
How to Replace the Fog Light Bulb on a Fiat Grande Punto
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) Replace the fog light bulbs if they are blown. Here’s how to replace them from the fog light. Remove the plastic cover at the bottom of the bumper us…
How to Replace the Headlight Bulbs on a Fiat Punto
How to Replace the Headlight Bulbs on a Fiat Punto
Fiat Punto (1999-2011 / MK 2, 188) Learn how to replace the headlight bulbs on a Fiat Punto. Open the front bonnet (pulling the lever located at the bottom right of the dashboard) and …

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos