Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Battery on Fiat Punto

Model: Fiat Punto 199, MK 3, Grandepunto , Punto EVO - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
Part: Battery

See other generations:
Video tutorial

Replacing the battery is a straightforward procedure on almost all car models, including Fiat. With the engine off and the handbrake engaged, lift the bonnet and unscrew (and thus disconnect) the two battery terminals. For safety reasons, always disconnect the negative terminal first before moving on to the positive.

At this point, simply unscrew the 13 mm bolt that secures the strap holding the battery in place. Remove the battery and reverse the process for installation.

It's that easy!


Updated on 20 April 2026 by ScegliAuto


Related tutorials

Replacing the Battery of the Fiat Grande Punto
Replacing the Battery of the Fiat Grande Punto
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) Today's procedure will show you how to remove and replace the battery of the Fiat Grande Punto, as well as the Punto Evo. First, open the bonnet of t…
Replacing the Battery on the Fiat Punto
Replacing the Battery on the Fiat Punto
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) If the battery on the Fiat Punto is flat and does not hold charge after attempts to recharge, it needs to be replaced. Open the bonnet and disconnect…
How to Change the Key Remote Battery of a Fiat Punto
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) Replacing the battery of the key remote for a Fiat Punto is a very simple task; all you need is a small flathead screwdriver and, of course, the new …

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos