Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Window Switches on the Fiat Grande Punto - Punto Evo

Model: Fiat Punto MK 3, Punto EVO, 199, Grandepunto - Years 2005-2018
Part: Window switch

Learn how to remove and replace the window switch or button of the Fiat Grande Punto, as well as the Punto Evo, by following these simple and quick steps. First, get inside the vehicle and use a sharp object to pry around the edges of the switch panel; then detach the piece and disconnect the electrical connector of the switch, as shown in the video. Separate the button from the cover and replace it with the new one; finally, insert it correctly back into place and reconnect its electrical cable!

Updated on 2 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Window Switch on the Fiat Grande Punto
How to Replace the Window Switch on the Fiat Grande Punto
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) .. on the Fiat Grande Punto, as well as on the Punto Evo, in simple steps. First, open the front door and start by removing the window switch by prising.. …
How to Replace the Air Filter in a Fiat Grande Punto?
How to Replace the Air Filter in a Fiat Grande Punto?
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) In this tutorial, see how to replace the air filter in a Fiat Grande Punto, an extremely simple and quick operation. First, ensure that the engine is…
How to change or repair the power window motor of the Fiat Grande Punto
How to change or repair the power window motor of the Fiat Grande Punto
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) .. motor of the Fiat Grande Punto, as well as the Punto Evo. First, we get inside the car and start to disassemble and remove the door panel; to do this,.. …

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos