Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Fiat
    3. :
  3. Punto
    4. : How to remove the external door handle of the Fiat Punto

Fiat Punto - Video tutorial

Model: Fiat Punto MK 2, 188 - Years 1999-2011
Part: Handle
Operation: How to remove the external door handle of the Fiat Punto

Let's find out in this guide how to remove and replace the external door handle of the Fiat Punto, following the instructions below. First we open the front door and start by removing the door panel, unscrewing all the screws and levering the sides; after which we unscrew the screws that we find inside the door, that is those of the handle, as shown in the video. At this point we remove the handle from the outside, replacing it with the new one; we extract and replace, if necessary, also the cylinder of the lock.


Posted on 24 September 2022 by ScegliAuto

Other guides that may interest you

    Frequently Asked Questions

    • Punto 2005-2018 - The rear door handle of my Fiat Grande Punto does not open, how can I fix it? Read Answer

How to open the bonnet of the Volkswagen Polo

Let's see in this short and simple guide the instructions that will allow us to open the bonnet of the Volkswagen Polo. First of all we open the front door, on the driver's side, and start pulling the opening lever of the engine hood, in order to open the lock; then let's move to the front of the vehicle and unhook the tab that we find on the central part, above the manufacturer's emblem, as shown in the video. At this point we block the bonnet with the lateral rod; then we accompany the bonnet down to close it again!

Watch the video!


by ScegliAuto

More videos