Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Repair or Replace the Door Handle and Lock of the Fiat Grande Punto

Model: Fiat Punto MK 3, Punto EVO, 199, Grandepunto - Years 2005-2018
Part: Door lock

This guide provides instructions on how to remove and replace the external door handle and lock of the Fiat Grande Punto. First, open the front door and begin removing the door panel by unscrewing all the fixing screws; then unscrew the side screws of the lock if you want to remove it, while unscrewing the internal screw of the external door handle, as shown in the video. At this point, remove and replace the previously mentioned components, then reassemble the lock and finally the door panel!

Updated on 19 September 2026 by ScegliAuto

Video tutorial

Related tutorials

Removing the Rear Door Panel on the Fiat Grande Punto
Removing the Rear Door Panel on the Fiat Grande Punto
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) In this video, you will see how to remove the rear door panel and how to solve the locking issue on the Fiat Grande Punto, as well as the Punto Evo. …
How to repair the fuel tank cap of the Fiat Grande Punto
How to repair the fuel tank cap of the Fiat Grande Punto
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) Today's instructions will show us how to repair the fuel tank cap of the Fiat Grande Punto, as well as the Punto Evo. First, we open the fuel door an…
How to Fix the Rear Lock on the Fiat Grande Punto
How to Fix the Rear Lock on the Fiat Grande Punto
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) The failure to open the rear door despite pulling the handle fully is a common fault on this car: to open the door, you must press firmly on it; the …

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos