Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Rear Door Panel on the Fiat Grande Punto

Model: Fiat Punto MK 3, Punto EVO, 199, Grandepunto - Years 2005-2018
Part: Door trim panel

In this video, you will see how to remove the rear door panel and how to solve the locking issue on the Fiat Grande Punto, as well as the Punto Evo. First, open the rear door and start by removing all the screws securing the door panel; then remove the metal clip from the window handle to detach it, as shown in the video. At this point, pry on the sides of the panel to unclip it, finally disconnecting the handle cable found at the back; follow the video to the end for the lock repair!

Updated on 21 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Removing the Rear Door Panel from a Fiat Grande Punto
Removing the Rear Door Panel from a Fiat Grande Punto
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) In this video tutorial, you will learn how to remove the rear door panel from a Fiat Grande Punto. First, open the door and then remove the window ha…
Removing the Rear Door Panel on the Fiat Grande Punto
Removing the Rear Door Panel on the Fiat Grande Punto
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) Discover in this video tutorial how to remove the rear door panel on the Fiat Grande Punto, as well as on the Punto Evo. First, open the rear door an…
Removing the Door Panel of the Fiat Grande Punto
Removing the Door Panel of the Fiat Grande Punto
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) Briefly follow the instructions to remove and replace the door panel of the Fiat Grande Punto, as well as the Punto Evo. First, open the door and beg…

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos