Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Door Panel and Handle on a Fiat Grande Punto

Model: Fiat Punto 199, MK 3, Grandepunto , Punto EVO - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
Part: Door trim panel

See other generations:
Video tutorial

In this tutorial, you will learn how to remove the front door panel and the external handle on a Fiat Grande Punto. First, remove the door panel by unscrewing all the fixing screws located on the sides and beneath the plastic cover of the internal handle; then, remove the window switch by disconnecting the electrical connector.

At this point, unclip and remove the panel by disconnecting the handle cable; then, unscrew the screws of the external handle to remove it, following the tutorial until the end!


Updated on 24 April 2026 by ScegliAuto


Related tutorials

Removing the Door Panel of the Fiat Grande Punto
Removing the Door Panel of the Fiat Grande Punto
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) Briefly follow the instructions to remove and replace the door panel of the Fiat Grande Punto, as well as the Punto Evo. First, open the door and beg…
Removing the Door Panel and Window Regulator Motor on the Fiat Grande Punto
Removing the Door Panel and Window Regulator Motor on the Fiat Grande Punto
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) In this guide, learn the steps to remove the front door panel and window regulator motor on the Fiat Grande Punto, as well as the Punto Evo. First, o…
Removing the Rear Door Panel on the Fiat Grande Punto
Removing the Rear Door Panel on the Fiat Grande Punto
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) In this video, you will see how to remove the rear door panel and how to solve the locking issue on the Fiat Grande Punto, as well as the Punto Evo. …

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos