Do it yourself
Frequently asked questions about cars and motorcycles

How to Reset the Window Regulators on the Fiat Grande Punto

Model: Fiat Punto 199, MK 3, Grandepunto , Punto EVO - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
Part: Warning light – error code

See other generations:
Video tutorial

In this video tutorial, you will learn how to reset and repair the non-functioning window switches on the Fiat Grande Punto, due to intermittent operation. A common fault lies in the electrical connector found between the door and its hinge; check that the wiring and connector are in good condition.

To perform a general reset of the control unit, disconnect the positive terminal of the battery for a few minutes, then reconnect it. Finally, check the operation of your window switches!


Updated on 6 July 2026 by ScegliAuto


Related tutorials

Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) Learn how to remove and replace the window switch or button of the Fiat Grande Punto, as well as the Punto Evo, by following these simple and quick s…
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) Do you want to remove the window regulator motor from the rear door on a Fiat Grande Punto? First, use a plastic lever to remove the door trim pieces…
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) In today's tutorial video, see how to remove and replace the front window regulator module on a Fiat Grande Punto in simple steps. First, remove the …

Other guides you may be interested in

    Frequently Asked Questions

    • Punto 2005-2018 - What does the steering wheel light on the Fiat Punto indicate? Read answer
    • Punto 2005-2018 - What does the ESP and Hill Holder light on the Grande Punto mean? Read answer
    • Punto 2005-2018 - How to reset the car radio in the Fiat Punto? Read answer
    • Punto 2005-2018 - What does the yellow triangle warning light mean in the Fiat Grande Punto? Read answer

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos