Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing and Installing the Window Regulator Module on a Fiat Grande Punto

Model: Fiat Punto MK 3, Punto EVO, 199, Grandepunto - Years 2005-2018
Part: Power window motor

In today's tutorial video, see how to remove and replace the front window regulator module on a Fiat Grande Punto in simple steps. First, remove the front door panel; unscrew all the screws, then pry at the sides to detach it. Next, use a socket spanner to unscrew the nuts of the window regulator mechanism to detach it from the glass and remove it; now replace it with the new one, securing the window back to the mechanism. Then, reassemble everything, following the tutorial video to the end!

Updated on 26 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to change or repair the power window motor of the Fiat Grande Punto
How to change or repair the power window motor of the Fiat Grande Punto
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) Today's video tutorial will show us how to disassemble and repair (or replace) the window regulator motor of the Fiat Grande Punto, as well as the Pu…
How to Change the Rear Window Regulator Mechanism on the Fiat Grande Punto?
How to Change the Rear Window Regulator Mechanism on the Fiat Grande Punto?
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) In today's tutorial, you will learn how to dismantle the rear window regulator mechanism on the Fiat Grande Punto, as well as on the Punto Evo. First…
Removing the Door Panel and Window Regulator Motor on the Fiat Grande Punto
Removing the Door Panel and Window Regulator Motor on the Fiat Grande Punto
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) In this guide, learn the steps to remove the front door panel and window regulator motor on the Fiat Grande Punto, as well as the Punto Evo. First, o…

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos