Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Where is the BCM module located in the Fiat Punto?

Model: Fiat Punto MK 3, Punto EVO, 199, Grandepunto - Years 2005-2018
Part: Control unit

In this video, you will see where the BCM module, which stands for "Body Control Module", is located in the Fiat Punto, useful in case you need to replace it. As shown, it is located inside the cabin, specifically behind the fuse box situated in the lower dashboard area on the driver's side. To access it, you will need to remove the fuse box by first disconnecting all the various connectors and unscrewing all the securing bolts. Once removed from its housing, you can separate it from the module using a flathead screwdriver.

Updated on 10 August 2026 by ScegliAuto

Video tutorial

Related tutorials

Where is the crankshaft sensor located on the Fiat Punto 1.2 8V?
Where is the crankshaft sensor located on the Fiat Punto 1.2 8V?
Fiat Punto (1999-2011 / MK 2, 188) In this video, we will see where the crankshaft sensor is located on the Fiat Punto 1.2 8V. It is positioned on the pulley of the belt near the crank…
Location of the immobilizer control unit of a Fiat Punto MK1
Location of the immobilizer control unit of a Fiat Punto MK1
Fiat Punto (1993-1999 / MK 1, 176) In this video we can see the position of the immobilizer control unit of the Fiat Punto MK1: the immobilizer is an electronic security system designe…
How to Replace the Blue&Me Control Unit on the Fiat Punto?
How to Replace the Blue&Me Control Unit on the Fiat Punto?
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) To replace the Blue&Me control unit on the Fiat Punto, open the glove compartment on the passenger side: once the compartment is open, loosen the scr…

Other guides you may be interested in

    Frequently Asked Questions

    • Punto 2005-2018 - Where is the Blue & Me control unit located on Fiat Grande Punto Evo? Read answer

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos