Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Fiat
    3. :
  3. Punto
    4. : Injectors

Fiat Punto - Injectors

Fiat Punto (2005-2018 / Grandepunto, MK 3, 199, Puntoevo)
How to disassemble the injectors of the Fiat Grande Punto 1.3 Multijet.
Below we will see step-by-step instructions that will allow us to disassemble and replace the diesel injectors of the Fiat Grande Punto 1.3 Multijet. First of …read all…
Posted on 17 December 2023 by ScegliAuto
Fiat Punto (2005-2018 / Grandepunto, MK 3, 199, Puntoevo)
How to replace the injectors of the Fiat Punto with a 1.3 Multijet engine?
We open the car engine compartment by lifting the front hood and then we lift the plastic cover of the engine (by first unscrewing the screws!). We locate the …read all…
Posted on 31 March 2023 by ScegliAuto
Fiat Punto (2005-2018 / Grandepunto, MK 3, 199, Puntoevo)
How to replace or clean the LPG injectors of the Fiat Grande Punto
To clean the LPG injectors (located behind the front axle shaft) on the Fiat Grande Punto we have to do this under the car, so we have to get some ramps so …read all…
Posted on 21 April 2024 by ScegliAuto
Fiat Punto (2005-2018 / Grandepunto, MK 3, 199, Puntoevo)
Disassembly of the injectors of the Fiat Grande Punto 1.3 Multijet
In today's video we will see how to remove and replace the fuel injectors on the Fiat Grande Punto 1.3 Multijet, but also on the 500 and Panda. First we open …read all…
Posted on 25 March 2024 by ScegliAuto
Fiat Punto (2005-2018 / Grandepunto, MK 3, 199, Puntoevo)
How to remove the injection pump on Fiat Grande Punto 1.3 Multijet.
To disassemble the injection pump, proceed with preparing all the necessary material (the two oil seals + the gasket kit, caliper, 50 and 25 TORX wrenches). …read all…
Posted on 11 March 2024 by ScegliAuto
Fiat Punto (2005-2018 / Grandepunto, MK 3, 199, Puntoevo)
Fiat Grande Punto 1.3 MultiJet injector disassembly instructions
In this video tutorial we will see the instructions on how to disassemble the injectors of a 1.3 MultiJet motorized Fiat Grande Punto. First we open the bonnet …read all…
Posted on 19 February 2024 by ScegliAuto
Fiat Punto (1993-1999 / 176, MK 1)
How to remove the injectors of a Fiat Punto
Before we can start, we will have to go and open the front hood of our Fiat Punto. Let's start then by going to remove the upper engine cover, unscrewing the …read all…
Posted on 5 January 2024 by ScegliAuto
Fiat Punto (1999-2011 / MK 2, 188)
Remove the injectors of the Fiat Punto
Do you want to remove the injectors of the Fiat Punto? Let's see in detail how to proceed in this video. We pull the lever to open the engine compartment …read all…
Posted on 19 November 2023 by ScegliAuto
Accelerator (1) Cigarette Lighter (4) Airbags (16) Alternator (7) Loudspeaker (11) Shock absorbers (19) Antenna (8) Air conditioning (5) Car stereo (49) Anti roll bar (1) Roof Rack Bars (5) Battery (26) Coil (2) Air Vents (6) Arm (11) Gearbox (13) Spark plugs (27) Glow plugs (10) Carburetor (1) Bodywork (10) Glove box (5) Control unit (8) Key (24) Timing belt (29) V-belt (6) Air conditioning (1) Air conditioning controls (5) -board computer (17) Checks and maintenance (115) Oil pan (4) Throttle body (7) Dashboard (17) Gearshift gaiter (2) Drive shaft boot (2) Bearing (6) Brake discs (11) Electric fan (1) Side indicator light (2) Headlight (27) Tail light (24) Fog lights (12) Air filter (34) Cabin air filter (38) Petrol filter (4) Diesel filter (28) Oil filter (11) Hand brake (10) Clutch (13) Grille (2) Injectors (8) Window lift switch (2) Accessory Kit (9) Light bulb (19) Side turn signal light bulb (8) Headlight bulb (51) Rear light bulb (25) Interior lights ceiling light bulb (11) Antifreeze liquid (7) Dashboard light (7) License plate light (8) Third brake light (6) Rear window (2) Handle (9) Muffler (6) Engine (11) Window motor (11) Starter motor (11) Power Steering Motor (4) Gear oil (4) Brake oil (4) Engine oil (20) Door panel (42) Windshield (1) Front bumper (17) Rear bumper (10) Brake pads (30) Hydraulic pistons (5) Tires (2) Gear Shift Knob (17) Pump (14) Fuel pump (16) Door (9) Push button (3) Window lift button (3) Instrument cluster (14) Radiator (9) Passenger compartment heating radiator (8) Wheel (4) Fuse box (54) Seat (29) Drive shaft (1) Crankshaft RPM sensor (4) Coolant temperature sensor (3) Parking sensors (1) Lock (21) Lambda sensor (2) Suspensions (4) Outside rearview mirror (32) Interior rearview mirror (1) Manufacturer's coat of arms (5) Engine mount (5) Drums and shoes (4) Windscreen wipers (25) Thermostat (11) Engine head (6) Steering rods (2) Brake oil pipes (1) Oil vapor pipes (1) Central tunnel (4) Windshield washer nozzle (3) Valve (3) EGR valve (9) Interior blower (12) Side window (4) Steering wheel (18)

How to open the bonnet of the Volkswagen Polo

Let's see in this short and simple guide the instructions that will allow us to open the bonnet of the Volkswagen Polo. First of all we open the front door, on the driver's side, and start pulling the opening lever of the engine hood, in order to open the lock; then let's move to the front of the vehicle and unhook the tab that we find on the central part, above the manufacturer's emblem, as shown in the video. At this point we block the bonnet with the lateral rod; then we accompany the bonnet down to close it again!

Watch the video!


by ScegliAuto

More videos