Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Injectors on the Fiat Punto with a 1.3 Multijet Engine?

Model: Fiat Punto 199, MK 3, Grandepunto , Punto EVO - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
Part: Fuel injectors

See other generations:
Video tutorial

Open the engine bay of the car by lifting the front bonnet, then remove the plastic engine cover (unscrewing the screws first!). Locate the injectors and disconnect the fuel pipes. Next, disconnect the connectors as well.

Now that the injectors are free from other components, unscrew and remove them from their seats. Take the new injectors and fit them in place of the ones you have removed, reconnect the connectors in the exact order they were previously and do the same with the diesel pipes.

Finally, refit the engine cover by screwing in the various screws.


Updated on 19 July 2026 by ScegliAuto


Related tutorials

Dismantling the Injectors of the Fiat Grande Punto 1.3 MultiJet
Dismantling the Injectors of the Fiat Grande Punto 1.3 MultiJet
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) In today's video, see how to dismantle and replace the fuel injectors of the Fiat Grande Punto 1.3 MultiJet, as well as on the 500 and Panda. First, …
Instructions for Removing Injectors from a Fiat Grande Punto 1.3 MultiJet
Instructions for Removing Injectors from a Fiat Grande Punto 1.3 MultiJet
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) In this video tutorial, you will see instructions on how to remove the injectors from a Fiat Grande Punto powered by a 1.3 MultiJet engine. First, op…
How to Remove the Injectors from the Fiat Grande Punto 1.3 Multijet
How to Remove the Injectors from the Fiat Grande Punto 1.3 Multijet
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) Below are the step-by-step instructions that will allow you to remove and replace the diesel injectors on the Fiat Grande Punto 1.3 Multijet. First, …

How to Reset the Tyre Pressure Warning Light on the Jeep Renegade?

To reset the tyre pressure warning light on the Jeep Renegade, inflate the tyres until they reach the recommended pressure: this value is indicated on the sticker attached to the driver’s door pillar. Once the tyres are properly inflated, navigate through the menu that appears on the instrument cluster until you find the tyre pressure option. At this point, press and hold the OK button on the right side of the steering wheel to make the warning light disappear.

Watch the video!


by ScegliAuto

More videos