Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Dismantling the Injectors of the Fiat Grande Punto 1.3 MultiJet

Model: Fiat Punto MK 3, Punto EVO, 199, Grandepunto - Years 2005-2018
Part: Fuel injectors

In today's video, see how to dismantle and replace the fuel injectors of the Fiat Grande Punto 1.3 MultiJet, as well as on the 500 and Panda. First, open the bonnet and start by removing the upper plastic cover; then disconnect the electrical connectors and use 14 mm and 17 mm spanners to unscrew and remove the injectors, as illustrated in the video. At this point, replace them with the new ones, of the correct type, that is, the original replacement for your engine type; insert them properly and finally insert the locking clips.

Updated on 3 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Injectors from the Fiat Grande Punto 1.3 Multijet
How to Remove the Injectors from the Fiat Grande Punto 1.3 Multijet
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) Below are the step-by-step instructions that will allow you to remove and replace the diesel injectors on the Fiat Grande Punto 1.3 Multijet. First, …
Instructions for Removing Injectors from a Fiat Grande Punto 1.3 MultiJet
Instructions for Removing Injectors from a Fiat Grande Punto 1.3 MultiJet
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) In this video tutorial, you will see instructions on how to remove the injectors from a Fiat Grande Punto powered by a 1.3 MultiJet engine. First, op…
Guide to Replacing the Injectors on the Fiat Punto 1.3 MultiJet
Guide to Replacing the Injectors on the Fiat Punto 1.3 MultiJet
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) In this guide, you will find instructions to remove and replace the injectors on the Fiat Punto 1.3 MultiJet. First, open the engine cover of the veh…

Other guides you may be interested in

How to Reset the Central Locking of the Volkswagen Golf 4?

If the central locking system of the Volkswagen Golf 4 is not working, it is likely necessary to reset the system: to do this, open the driver's door and detach the side panel of the dashboard next to the steering wheel. Under this panel, you will find the fuses, including the one for the central locking, which is indicated in the manual as number 14. To reset the system, remove this fuse from its housing, then reinsert it or replace it with a new one of the same amperage: this will reset the central locking system.

Watch the video!


by ScegliAuto

More videos