Do it yourself
| ||||
|
Fiat Punto - Video tutorial
Model: Fiat Punto
176, MK 1
- Years 1993-1999 Before we can start, we will have to go and open the front hood of our Fiat Punto. Let's start then by going to remove the upper engine cover, unscrewing the fixing bolts. After that, we will have to go and remove the relevant sleeve. By doing so, we will have reached the injectors. We then proceed by disconnecting the electrical connectors located in the upper part of the injectors. At this point, we can go and unscrew the screws that secure the injectors to the cylinder head. Once this is done, we will necessarily have to go and disconnect the petrol pipe. When we have completed this step, we will be able to remove the injectors, and we will have finished the disassembly.
Posted on 5 January 2024 by ScegliAuto
How to disassemble the injectors of the Fiat Grande Punto 1.3 Multijet.
Fiat Punto (2005-2018 / Punto EVO, Grandepunto , MK 3, 199) Below we will see step-by-step instructions that will allow us to disassemble and replace the diesel injectors of the Fiat Grande Punto 1.3 Multijet.
Disassembly of the injectors of the Fiat Grande Punto 1.3 Multijet
Fiat Punto (2005-2018 / Punto EVO, Grandepunto , MK 3, 199) In today's video we will see how to remove and replace the fuel injectors on the Fiat Grande Punto 1.3 Multijet, but also on the 500 and Panda. First
How to replace the injectors of the Fiat Punto with a 1.3 Multijet engine?
Fiat Punto (2005-2018 / Punto EVO, Grandepunto , MK 3, 199) We open the car engine compartment by lifting the front hood and then we lift the plastic cover of the engine (by first unscrewing the screws!). We l Other guides that may interest you
|
Frequently Asked QuestionsFiat Ducato 2.8 JTD gearbox oil replacementLet's see in this guide the main steps to be able to change the transmission oil of the second series Fiat Ducato, with 2.8 JTD engine. First of all we lift the car and go to locate the gear oil vent bolt, which we find near the transmission; we use a hex wrench to unscrew it, letting it drain the old oil in a container for about ten minutes. At this point we open the bonnet and remove the air intake sleeve, so as to be able to access the gearbox oil filling hole; then we fill up to the maximum level! by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.039
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |