Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the External Door Handle on a Fiat Grande Punto?

Model: Fiat Punto 199, MK 3, Grandepunto , Punto EVO - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
Part: Handle

See other generations:
Video tutorial

To replace the external door handle on a Fiat Grande Punto, remove the inner door panel by loosening its fixing screws and disconnecting the connectors. Once the panel is removed, loosen the 10 mm screws located inside corresponding to the handle.

This will allow you to pull out the actuator and loosen the now accessible 13 mm screws. The handle can then be pulled out from its housing by pulling it from the outer side of the door; at this point, the parts can be replaced.


Updated on 29 April 2026 by ScegliAuto


Related tutorials

How to Replace the External Door Handle on the Fiat Punto?
How to Replace the External Door Handle on the Fiat Punto?
Fiat Punto (1999-2011 / MK 2, 188) To replace the external door handle on the Fiat Punto, first detach the inner door panel. Start by removing the speaker cover, which can then be take…
Removing the Door Panel and Handle on a Fiat Grande Punto
Removing the Door Panel and Handle on a Fiat Grande Punto
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) In this tutorial, you will learn how to remove the front door panel and the external handle on a Fiat Grande Punto. First, remove the door panel by u…
How to Replace the Rear Handle of the Fiat Grande Punto
How to Replace the Rear Handle of the Fiat Grande Punto
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) If you need to remove and reinstall the rear handle on this vehicle, find the instructions below and also check the video. First, remove the inner do…

How to Open the Fuel Filler Flap in the Hyundai i30?

In this tutorial, you will learn how to open the fuel filler flap in the Hyundai i30, a very simple operation that follows the typical procedure of most vehicles. First, unlock the locks using the designated button on the remote, then open the driver's door, locate the release lever on the left side of the seat, and operate it. Next, move to the fuel filler flap, open it completely, unscrew the cap, and refuel as needed. To close the flap, simply press it gently.

Watch the video!


by ScegliAuto

More videos