Do it yourself
| ||||
|
Fiat 500 - Video tutorial
Model: Fiat 500
- Years 2007-2022 Today's guide will show us the steps on how to recharge the air conditioning gas of the Fiat 500 Abarth. First, let's open the engine hood of our car and start unscrewing the cap of the air conditioning recharge inlet; then, let's start the engine and locate the air conditioning compressor, as shown in the video. At this point, let's connect our pump to purge the air conditioning gas, and then proceed with the recharge; finally, let's verify the operation, following the video tutorial until the end!
Posted on 10 November 2023 by ScegliAuto
This video is currently unavailable
Other guides that may interest you
|
Frequently Asked QuestionsHow to reset the tire pressure warning light on Dacia Sandero?Let's see below how it is possible to reset the low tire pressure signal on the car: first of all it is necessary to check the correct tire pressure by comparing it with the pressures reported in the use and maintenance manual. After that, turn on the ignition and locate the command on the right side of the steering wheel at the top that allows you to access the on-board computer menu, then select the car symbol, after which select the "up arrow" command up to that the indication "tire pressure" appears on the display. At that point, press the "Ok" control on the steering wheel and keep it pressed to reset the signal. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.024
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |