Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Instructions for Removing the Front Bumper on Abarth 595 - Fiat 500

Model: Fiat 500 500 X - Years: 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022
Part: Front bumper

See other generations:
Video tutorial

In today's video, you will see the main instructions on how to remove the front bumper from an Abarth 595 and Fiat 500. First, start by unscrewing all the lower screws found on the bumper using a Torx screwdriver; perform the same operation by unscrewing the screws located on both sides of the wheel arches, as shown in the video.

At this point, unscrew the upper screws of the bumper and those securing the headlights; gently remove the front bumper.

The replacement of the front headlights is then shown!


Updated on 8 April 2026 by ScegliAuto


Related tutorials

Front Headlamp Replacement for Fiat 500 - Abarth 595
Front Headlamp Replacement for Fiat 500 - Abarth 595
Fiat 500 (2007-2021 / 312) .. how to remove and replace the front headlamp of a Fiat 500 or an Abarth 595. First, open and lift the bonnet. Next, remove the front bumper by taking.. …
How to Remove the Front Bumper of the Fiat 500 Abarth
How to Remove the Front Bumper of the Fiat 500 Abarth
Fiat 500 (2007-2024 / 312) .. us to remove and replace the front bumper of the Fiat 500 Abarth. First, open the engine bonnet of the vehicle and begin unscrewing all the fastening.. …
Fiat 500, Abarth 595 Gear Knob and Gaiter Replacement
Fiat 500, Abarth 595 Gear Knob and Gaiter Replacement
Fiat 500 (2007-2024 / 312) .. and replace the gear knob and gaiter of a Fiat 500 and an Abarth 595. First, get inside the vehicle and remove the upper cover of the gear knob:.. …

Other guides you may be interested in

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos