Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Front Headlamp Replacement for Fiat 500 - Abarth 595

Model: Fiat 500 312 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Headlight

See other generations:
Video tutorial

Today, you will learn how to remove and replace the front headlamp of a Fiat 500 or an Abarth 595. First, open and lift the bonnet. Next, remove the front bumper by taking out the plastic screws located on both sides of the wings.

Now, remove all screws located at the top and bottom of the bumper and gently pull it out; then, unscrew the support screws of the headlamp bracket and remove the headlamps by disconnecting the electrical connector of the bulbs. Finally, refit the new headlamps and all other components!


Updated on 4 April 2026 by ScegliAuto


Related tutorials

Instructions for Removing the Front Bumper on Abarth 595 - Fiat 500
Instructions for Removing the Front Bumper on Abarth 595 - Fiat 500
Fiat 500 (2014-2022 / 500 X) .. on how to remove the front bumper from an Abarth 595 and Fiat 500. First, start by unscrewing all the lower screws found on the bumper using a.. …
Replacing the Remote Control Cover of a Fiat 595 Abarth
Replacing the Remote Control Cover of a Fiat 595 Abarth
Fiat 500 (2020-2026 / 500 E, 332) Over time and with use, the remote control cover of a Fiat 595 Abarth can become filled with unsightly scratches, compromising its appearance. By sea…
In today's tutorial video, see how to remove and replace, in simple and quick steps, the front headlight bulb on the Fiat 500, including the Abarth version. First, open the bonnet of your car and start by removing the protection cap of the bulbs, located
In today's tutorial video, see how to remove and replace, in simple and quick steps, the front headlight bulb on the Fiat 500, including the Abarth version. First, open the bonnet of your car and start by removing the protection cap of the bulbs, located
Fiat 500 (2007-2021 / 312) …

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos