Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Where is the OBD port located on the 2017 Fiat 500 Abarth?

Model: Fiat 500 312 - Years 2007-2024
Part: Dashboard

Being able to independently locate the OBD port inside your 2017 Fiat 500 Abarth can be difficult as the OBD port in question is well hidden inside the dashboard and therefore not easily identifiable. Thanks to the following guide, you will finally be able to find it in a few seconds. First of all, reach the driver's seat and make sure that your Fiat 500 Abarth is completely turned off, then remove the side part of the dashboard and locate the OBD port right behind it. To connect a diagnostic tool, you will need any compatible cable.

Posted on 27 May 2024 by ScegliAuto

This video is currently unavailable

Related tutorials

Where is the OBD Port on the Fiat 500 Abarth?
Where is the OBD Port on the Fiat 500 Abarth?
Fiat 500 (2007-2024 / 312) If you want to locate the OBD port inside the cabin of your Fiat 500 Abarth, follow these steps. First, ensure the car is turned off, then reach the …
Where is the OBD port located in the Fiat 500 Abarth?
Where is the OBD port located in the Fiat 500 Abarth?
Fiat 500 (2007-2024 / 312) To find the OBD port inside the cabin of your Fiat 500 Abarth in just a few seconds, you simply need to follow the steps described in our new guide. …
Where is the OBD port located in the Fiat 500?
Where is the OBD port located in the Fiat 500?
Fiat 500 (2007-2024 / 312) If you do not yet know where the OBD port of your new Fiat 500 is located, do not worry because thanks to the simple procedure described below, you w…

Other guides you may be interested in

    Frequently Asked Questions

    • 500 2007-2024 - How much does it cost to replace the dashboard dashboard of the FIAT 500? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos