Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the Service light on a Fiat 500 Abarth?

Model: Fiat 500 312 - Years 2007-2024
Part: Service warning light

To reset the Service light on a Fiat 500 Abarth, connect a diagnostic tool to the vehicle's OBD port, located on the dashboard just below the steering column. Once the scanner is connected, select the car model and its corresponding version; this will allow you to follow the instructions in the tutorial to ensure the light disappears. After the reset, disconnect the scanner and check that the light has gone out.

Updated on 13 September 2026 by ScegliAuto

Video tutorial

Related tutorials

Instructions to Reset the Service Light on a Fiat 500 Abarth
Instructions to Reset the Service Light on a Fiat 500 Abarth
Fiat 500 (2007-2021 / 312) Here are the instructions on how to reset the service light for the routine maintenance oil change on an Abarth 500, in very simple steps. After perf…
How do you reset the Service light on the Fiat 500 Abarth?
How do you reset the Service light on the Fiat 500 Abarth?
Fiat 500 (2007-2024 / 312) In order to reset the Service light of the Fiat 500 Abarth, you need to insert the ignition key into the corresponding slot, so that you can turn the…
How to Reset the Service Light on a Fiat 500 Abarth
Fiat 500 (2007-2022 / 312) Below, we will see how to reset the service light for the engine oil change on the Fiat 500 Abarth. First, get into the vehicle and connect your diag…

    Frequently Asked Questions

    • 500 2014-2022 - What does the oil warning light indicate in the Fiat 500X? Read answer
    • 500 2014-2022 - How to reset the service warning light on the Fiat 500X? Read answer
    • 500 2007-2024 - How to reset the Abarth 595 Service warning light? Read answer

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos