How to Reset the Service Light on a Fiat 500 Abarth

Model: Fiat 500 312 - Years 2007-2022
Part: Service warning light

Below, we will see how to reset the service light for the engine oil change on the Fiat 500 Abarth. First, get into the vehicle and connect your diagnostic software to the OBD port; then turn on the ignition, as shown in the video. Next, select the make, model, and engine type, following the procedure indicated to reset the oil change light. Once the operation is complete, disconnect your computer and start the engine!

Updated on 27 June 2026 by ScegliAuto

This video is currently unavailable

Other guides you may be interested in

Engine - Maintenance and repair on other vehicles

Engine Oil - Maintenance and repair on other vehicles

- Maintenance and repair on other vehicles

Frequently Asked Questions

500 2014-2022 - What does the oil warning light indicate in the Fiat 500X? Read answer
500 2014-2022 - How to reset the service warning light on the Fiat 500X? Read answer
500 2007-2024 - How to reset the Abarth 595 Service warning light? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!

by ScegliAuto

How to Reset the Service Light on a Fiat 500 Abarth

Related tutorials

Other guides you may be interested in

Frequently Asked Questions

How to Check the Oil Level on a Jeep Renegade?

More videos