Do it yourself
Frequently asked questions about cars and motorcycles

How to Reset the Service Light on an Abarth 500

Model: Fiat 500 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Service warning light

See other generations:
Video tutorial

The video demonstrates the procedure to reset the Service light on an Abarth 500. Before performing this procedure, it is advisable to change the engine oil and its corresponding filter using suitable material, such as the 10W50 oil specified in the instruction manual.

To reset the Service light on the Abarth 595, enter the cabin and turn on the instrument cluster without starting the car. At this point, press the accelerator three times and turn the ignition key to the "off" position.

This should make the light disappear; repeat the procedure if it does not.


Updated on 13 June 2026 by ScegliAuto


Related tutorials

Fiat 500 (2007-2024 / 312) To reset the Service light on a Fiat 500 Abarth, connect a diagnostic tool to the vehicle's OBD port, located on the dashboard just below the steerin…
Fiat 500 (2007-2024 / 312) To reset the Service light on the Fiat 500 Abarth, insert the ignition key into the corresponding slot to turn on the ignition. Once the ignition is …
Fiat 500 (2007-2021 / 312) Here are the instructions on how to reset the service light for the routine maintenance oil change on an Abarth 500, in very simple steps. After perf…

Other guides you may be interested in

    Frequently Asked Questions

    • 500 2007-2022 - What does the coupon expired warning light on the Fiat 500 mean? Read answer
    • 500 2007-2022 - What does the service light indicate in the FIAT 500? Read answer
    • 500 2014-2022 - How to reset the service warning light on the Fiat 500X? Read answer
    • 500 2007-2024 - How to reset the engine oil light on the Fiat 500? Read answer
    • 500 2007-2024 - How to reset the Abarth 595 Service warning light? Read answer

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos