Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Cigarette Lighter on a Fiat Grande Punto

Model: Fiat Punto 199, MK 3, Grandepunto , Punto EVO - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
Part: Accelerator

See other generations:
Video tutorial

Learn how to remove the cigarette lighter located in the centre console of a Fiat Grande Punto. Use a plastic lever to detach the trim around the gear lever (if necessary, remove the knob), then detach the panel with the cigarette lighter.

Disconnect the power terminals of the cigarette lighter and other buttons. Remove the piece (along with the round plastic) and replace it with a new one (original or compatible) of the same size and voltage.

After installing the cigarette lighter in the console: reassemble the trim with all the previously removed parts.


Updated on 11 March 2026 by ScegliAuto


Related tutorials

How to Replace the Cigarette Lighter on a Fiat Grande Punto?
How to Replace the Cigarette Lighter on a Fiat Grande Punto?
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) To replace the cigarette lighter on a Fiat Grande Punto, remove the top part of the lighter to access the components inside. Use a tool like a screwd…
Removing Cigarette Lighter from Fiat Punto Evo
Removing Cigarette Lighter from Fiat Punto Evo
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) In today's video tutorial, you will see the instructions needed to remove the cigarette lighter from a Fiat Punto Evo by following these simple steps…
Where is the cigarette lighter fuse located in a Fiat Punto
Where is the cigarette lighter fuse located in a Fiat Punto
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) This video illustrates where the cigarette lighter fuse is positioned in a Fiat Grande Punto. This operation may be necessary in case of a malfunctio…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos