Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Radio from the Fiat 500 Abarth

Model: Fiat 500 312 - Years 2007-2022
Part: Car stereo

In this video tutorial, you will learn how to remove and replace the standard radio or the entire multimedia system with the corresponding display in the Fiat 500 Abarth. First, get inside the vehicle and start by removing the plastic cover found in the centre of the dashboard; then, lever the climate control buttons to detach and remove them, also taking out the central air vents, as illustrated in the video. At this point, unscrew the fixing screws of the radio to remove it, disconnecting the electrical wiring at the back; then reassemble everything!

Updated on 25 June 2026 by ScegliAuto

Video tutorial

Related tutorials

Where is the OBD port located on the 2017 Fiat 500 Abarth?
Fiat 500 (2007-2024 / 312) Being able to independently locate the OBD port inside your 2017 Fiat 500 Abarth can be difficult as the OBD port in question is well hidden inside t…
How to Replace the Gear Knob of the Fiat 500 Abarth?
How to Replace the Gear Knob of the Fiat 500 Abarth?
Fiat 500 (2007-2021 / 312) To replace the gear knob of the Fiat 500 Abarth, grasp the knob and turn it anti-clockwise until it is free from the top of the lever. Once the knob …
How to Replace the Ignition Coils on a Fiat 500 Abarth?
How to Replace the Ignition Coils on a Fiat 500 Abarth?
Fiat 500 (2007-2022 / 312) To replace the ignition coils on a Fiat 500 Abarth, open the bonnet to access the components inside. You will need to loosen the retaining rings that…

Other guides you may be interested in

    Frequently Asked Questions

    • 500 2007-2022 - Why does the radio volume control on the Fiat 500 not work? Read answer
    • 500 2007-2022 - What to do if the radio of the Fiat 500 does not work? Read answer
    • 500 2012-2023 - How to unlock Fiat 500 car stereo? Read answer

How to reset the tyre pressure warning light on the Suzuki Jimny?

To reset the tyre pressure warning light on the Suzuki Jimny, first inflate the tyres to the pressure value indicated on the corresponding sticker: this is located at the bottom of the driver's door pillar. Once the tyres are inflated, insert the ignition key and turn on the instrument panel: select the screen that indicates the tyre pressures, checking that the values change. After a few seconds, the tyre pressure warning light will automatically turn off.

Watch the video!


by ScegliAuto

More videos