Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Glow Plugs on a Fiat 500L 1.3 Multijet

Model: Fiat 500 500 L - Years 2012-2023
Part: Glow plugs

In this brief guide, find the instructions to remove and replace the glow plugs on the Fiat 500L with a 1.3 Multijet engine. First, open the bonnet of your car and begin by removing the engine cover. Then, disconnect the electrical connectors of the glow plugs using a socket wrench with an extension to unscrew and remove them, as shown in the video. At this point, install the new glow plugs of the correct type and thread pitch, reconnect them, and reassemble everything!

Updated on 6 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Change the Glow Plugs on the Fiat 500 L 1.3 Multijet
How to Change the Glow Plugs on the Fiat 500 L 1.3 Multijet
Fiat 500 (2012-2023 / 500 L) This guide provides the main instructions for removing and replacing the glow plugs on the Fiat 500 L 1.3 Multijet. First, open the bonnet and begin …
Changing Engine Oil and Oil Filter on Fiat 500L 1300 MultiJet
Changing Engine Oil and Oil Filter on Fiat 500L 1300 MultiJet
Fiat 500 (2012-2023 / 500 L) With the engine off, lift the bonnet and unscrew the three 10 mm bolts securing the engine cover. At this point, you will see the engine oil filter, …
How to Install Roof Bars on a Fiat 500L
How to Install Roof Bars on a Fiat 500L
Fiat 500 (2012-2023 / 500 L) Start by assembling the roof bars, adjusting them to the correct measurements for the roof of your Fiat 500L. Next, open the doors of your car and po…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos