Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Fiat
    3. :
  3. Panda
    4. : How do you replace the EGR valve on the Fiat Panda?

Fiat Panda - Video tutorial

Model: Fiat Panda 169, MK 2 - Years 2003-2012
Part: Valve
Operation: How do you replace the EGR valve on the Fiat Panda?

In order to replace the EGR valve on the Fiat Panda, you need to open the bonnet, so that you can access the components located inside the engine compartment: the valve is positioned in the rear part of the engine block, immediately below the I unload. To remove it, it is necessary to completely extract the engine block from inside its housing compartment: therefore, by loosening the screws and disconnecting the connectors, the valve can be removed from its seat, by unscrewing the fastening screws and disconnecting the connectors, so that a new one be inserted.


Posted on 16 May 2023 by ScegliAuto

Other guides that may interest you

    Frequently Asked Questions

    • Panda 2003-2012 - How much does a thermostatic valve cost for the petrol Fiat Panda 1.2? Read Answer
    • Panda 2003-2012 - Where is the thermostatic valve of the Fiat Panda 4x4 located? Read Answer

How to reset the TPMS light of the Volkswagen Polo 2011

The orange tire light indicates the presence of one or more tires with an inflation pressure below the recommended limit. All this is easily solved by inflating them correctly or replacing them in the event of a puncture. After carrying out these operations it is necessary to reset the warning light and therefore also the sensor in order to have new reading data. All you have to do is start the car ignition and then fully open the glove compartment on the passenger side. Locate the two buttons in the right corner and press "Set". At this point the reset is complete and you can turn off the ignition.

Watch the video!


by ScegliAuto

More videos