Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Fiat
    3. :
  3. 500
    4. : How to repair the tires of the Fiat 500L

Fiat 500 - Video tutorial

Model: Fiat 500 500 L - Years 2012-2023
Part: Tires
Operation: How to repair the tires of the Fiat 500L

In today's video we will see how to repair one or more tires in the Fiat 500L, using the special inflate and repair kit. First we place the car on a flat surface and pull the brake. We extract the kit from the trunk. We insert the sleeve into the tire inflation valve and read the pressure (if it is lower than 1.3 bar it cannot be repaired). Now connect the power supply to the cigarette lighter and turn on the instrument. After a while the work will be done. Let's detach it and put it back in the special compartment. Remember to drive at a maximum of 80 km / h and have the car checked as soon as possible.


Posted on 22 April 2024 by ScegliAuto

    Frequently Asked Questions

    • 500 2012-2023 - When does the tire pressure warning light come on in the FIAT 500 L? Read Answer
    • 500 2014-2022 - When does the tire warning light come on in the Fiat 500X? Read Answer
    • 500 2012-2023 - How to reset the tire pressure warning light in Fiat 500? Read Answer
    • 500 2012-2023 - How much do the tires on the Fiat 500L cost? Read Answer
    • 500 2012-2023 - What to do if the Fiat 500L has tire problems? Read Answer
    • 500 2007-2023 - What does the tire pressure warning light mean on Fiat 500 and how to fix it? Read Answer
    • 500 2007-2023 - Yellow warning light with exclamation point on Fiat 500, what does it mean? Read Answer
    • 500 2014-2022 - Tire pressure reset on Fiat 500x? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos