Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Fiat
    3. :
  3. 500
    4. : Where is the cigarette lighter fuse located in the Fiat 500?

Fiat 500 - Video tutorial

Model: Fiat 500 312 - Years 2007-2022
Part: Cigarette Lighter
Operation: Where is the cigarette lighter fuse located in the Fiat 500?

In the event that the cigarette lighter socket of our Fiat 500 suddenly stops working, we can first of all check the state of the relevant fuse whose location is indicated in this video. As shown, the fuse in question is located in the box located inside the engine compartment, right next to the battery. It is from 15A and is the fourth of the left column when looking at the vehicle from the front. In the event that it turns out to be faulty, make sure to use a spare part with the same specifications and to always operate with the vehicle off, so as not to cause any damage to the various connected devices.


Posted on 17 November 2022 by ScegliAuto

    Frequently Asked Questions

    • 500 2007-2022 - Why doesn't the cigarette lighter socket on the Fiat 500 work anymore? Read Answer
    • 500 2007-2022 - How much does the cigarette lighter kit cost for the Fiat 500? Read Answer
    • 500 2007-2021 - How do you replace the cigarette lighter of the Fiat 500? Read Answer
    • 500 2007-2022 - How is it replacing the cigarette lighter of the Fiat 500? Read Answer
    • 500 2007-2022 - Where is the fuse of the cigarette lighter in the Fiat 500? Read Answer
    • 500 2012-2023 - Where is the cigarette lighter fuse on Fiat 500? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos