Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Why doesn't the Fiat 500 cigarette lighter socket work?

Model: Fiat 500 312 - Years 2007-2024
Part: Cigarette lighter

The cigarette lighter socket of the Fiat 500 stops working when the reference fuse burns out, so it will be necessary to check and replace it. The cigarette lighter socket is located on the central dashboard, near the gear shift. The fuses for the cigarette lighter socket are located in the fuse box inside the engine compartment. The fuses in question are labeled F85 for 15 amps and T91 for 30 amps. To view the fuses, it is necessary to open the engine compartment and remove the cover on the box, locate the fuse using the diagram on the cover, remove it, and insert a new one.

Posted on 2 June 2024 by ScegliAuto

Video tutorial

Related tutorials

Where is the OBD2 port located on the Fiat 500 X?
Where is the OBD2 port located on the Fiat 500 X?
Fiat 500 (2014-2022 / 500 X) The OBD2 port of the Fiat 500 X, mandatory on all Fiat vehicles and not only, is located on the lower part of the dashboard on the driver's side. The…
Replacing the Cigarette Lighter Socket on a Fiat 500L
Replacing the Cigarette Lighter Socket on a Fiat 500L
Fiat 500 (2012-2023 / 500 L) Obtain a wedge or a plastic lever and pry in the gap around the cover near the gear lever. Once the surface cover is removed, also take out the under…
Where is the OBD2 port located in the Fiat 500?
Where is the OBD2 port located in the Fiat 500?
Fiat 500 (2007-2024 / 312) If you are experiencing malfunctions in the control unit of your Fiat 500 and you want to use a diagnostic tool, then you must read the following gui…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos