Do it yourself
Frequently asked questions about cars and motorcycles

Engine warning light on a Fiat 500 with original LPG system.

Model: Fiat 500 500 L - Years 2012-2023
Part: Checks and maintenance

In this video we see what is the reason for the engine warning light coming on in a Fiat 500 with the original Landi Renzo gas system, the one installed by the manufacturer. The symptoms it gives are that, when starting, the car runs on three cylinders, and after a few seconds immediately switches back to running on gasoline. The diagnosis made by a professional tells us that it is a failure to ignite the gas in cylinders 1, 2, and 4. A check was made on the pressure reducer, but it is working fine, so the GPL injectors and the two filters, both the liquid phase and the gas phase, need to be replaced.

Posted on 18 June 2025 by ScegliAuto

Video tutorial

Related tutorials

Fiat 500 (2007-2021 / 312) This guide provides instructions on how and when to change the timing belt of the Fiat 500 with a 1.2 engine. The timing belt for this type of engine…
Fiat 500 (2007-2024 / 312) Want to remove the original radio from your Fiat 500? Follow this guide to remove the original stereo: remove the plastic cover buttons (as shown in …
Fiat 500 (2007-2022 / 312) In today's video, you will learn how to replace the injectors in the Fiat 500 LPG. This operation is necessary when your vehicle has an irregular idl…

    Frequently Asked Questions

    • 500 2007-2022 - What does the parking assistance not available on the Fiat 500 mean? Read answer
    • 500 2007-2022 - Why does the trunk of the Fiat 500C not open? Read answer
    • 500 2007-2022 - How much does the panoramic roof cost in the Fiat 500? Read answer
    • 500 2007-2024 - Why is the USB port of the Fiat 500 not working? Read answer
    • 500 2007-2024 - What does the message "Start & Stop not available" mean in the Fiat 500? Read answer
    • 500 2014-2022 - In what position is the passenger compartment filter on the Fiat 500x? Read answer
    • 500 2012-2023 - What does "Anomaly P2930" mean on a Fiat 500L? Read answer
    • 500 2007-2024 - Why does the Fiat 500 Start & Stop not work? Read answer
    • 500 2014-2022 - What does the wording "Service expired" on the Fiat 500X mean? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos