Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Guide to replacing the 12V battery of the Toyota Yaris Cross

Model: Toyota Yaris Cross MK 1 - Years 2020-2026
Part: Battery

Today we will see the main instructions that will allow us to disassemble and replace the 12V battery of the Toyota Yaris Cross. First, we open the rear right door of the car and start removing the plastic cover located under the seat, positioned at the corner; we find the battery inside, where we will disconnect both battery terminals (positive and negative), as shown in the video. Now we remove and replace the battery with the new one, of the correct type and having the same amperage; we reassemble the battery and finally the plastic partition.

Posted on 24 October 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Start the Auxiliary Battery (12V) of a Toyota Yaris Cross
How to Start the Auxiliary Battery (12V) of a Toyota Yaris Cross
Toyota Yaris Cross (2020-2026 / MK 1) Learn how to start a Toyota Yaris Cross that may be stationary due to the auxiliary battery (the standard 12V battery). This battery is located in th…
How to charge the 12V battery of the Toyota Yaris Cross.
How to charge the 12V battery of the Toyota Yaris Cross.
Toyota Yaris Cross (2020-2026 / MK 1) In this brief guide, we will see the instructions that will allow us to recharge the battery of the Toyota Yaris Cross in simple and quick steps. To …
How to Start a Toyota Yaris Cross Hybrid with a Flat 12V Battery
How to Start a Toyota Yaris Cross Hybrid with a Flat 12V Battery
Toyota Yaris Cross (2020-2026 / MK 1) In this video, we will see how to proceed if the 12V battery of your Toyota Yaris Cross Hybrid is flat: this vehicle does not have a traditional star…

Other guides you may be interested in

How to Repair the Key Spring of the Peugeot 207?

Over time, frequent use of the key's flip mechanism in the vehicle, dozens of times a day, inevitably leads to wear of the internal spring. As shown in this video, replacing the spring is quite simple and takes little time. After opening the casing halfway, first position the key, then the spring housing, and finally insert the spring into the previously mentioned housing. Close the casing by rotating it clockwise, ensuring all components fit perfectly, and test the key's flip mechanism.

Watch the video!


by ScegliAuto

More videos