|
Do it yourself
| |||
| ||||
How to Start a Toyota Yaris Cross Hybrid with a Flat 12V Battery
Model: Toyota Yaris Cross
MK 1
- Years:
2020, 2021, 2022, 2023, 2024, 2025, 2026
Video tutorial
In this video, we will see how to proceed if the 12V battery of your Toyota Yaris Cross Hybrid is flat: this vehicle does not have a traditional starter motor and does not start with jumper cables; the 12V battery powers only the computers, control units, and hybrid control systems; without this voltage, the vehicle is dead, even if the high-voltage hybrid battery is charged. Ensure you have the car keys in your pocket or leave a door open; you will need jumper cables, a donor vehicle (or a jump starter/power bank). Open the bonnet: inside the fuse box, locate the positive terminal (red) and connect the other red clamp to the donor vehicle's battery; then connect the black cable to the negative terminal of the donor vehicle's battery and the other end to a clean, unpainted metal ground point. Start the donor vehicle for 2 minutes, then start the Yaris Cross. Remove the cables in reverse order. Do not turn off the Yaris for at least 20-30 minutes.
Posted on 13 June 2026 by ScegliAuto
Related tutorials
Toyota Yaris Cross
(2020-2026 /
MK 1)
Today we will see the main instructions that will allow us to disassemble and replace the 12V battery of the Toyota Yaris Cross. First, we open the r…
Toyota Yaris Cross
(2020-2026 /
MK 1)
The battery of the Toyota Yaris Cross Hybrid is installed inside the cabin; specifically, the battery is placed under the rear passenger seat. In cas…
Toyota Yaris Cross
(2020-2026 /
MK 1)
Learn how to start a Toyota Yaris Cross that may be stationary due to the auxiliary battery (the standard 12V battery). This battery is located in th…
Other guides you may be interested in
|
How to Activate the Disabled TRC on the Toyota Yaris?
As the video clearly shows, disabling or activating the traction control (TRC or ESP) on the Toyota Yaris is very simple. By default, the traction system activates every time the vehicle is started. To disable it, simply press the button depicting a skidding car located in the centre of the vehicle where the controls are, such as the hazard lights and the radio, but near the handbrake. Once disabled, the TRC off light will illuminate on the dashboard. To reactivate it, just press the same button again. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.181
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |