Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Where to find and how to test the fuse and relay of the starter motor of the Toyota Yaris.

Model: Toyota Yaris Xp130 - Years 2011-2019
Part: Starter motor

The video shows the location and test of the fuse and relay of the starter motor of a Toyota Yaris: both are located in the engine compartment, inside the fuse box near the battery. The starter fuse (30A) is the third in a row. The starter relay is not labeled on the box, but is one of the four present, and the youtuber removed it to perform a direct test. The test is done by connecting pins 3 and 5 with a tool and activating the starter motor: pin 3 receives current from the fuse, the central pin goes directly to the starter motor. This way we can verify the functioning of the electrical components that control the starting of the car.

Posted on 6 November 2025 by ScegliAuto

Video tutorial

Related tutorials

Replacement of the starter motor of the Toyota Yaris
Replacement of the starter motor of the Toyota Yaris
Toyota Yaris (2005-2011 / Xp90) The following steps will show us how to disassemble and replace the starter motor of the Toyota Yaris. First, we open the engine hood of the car and …
Where Are the Starter Motor Fuses Located in the Toyota Yaris?
Where Are the Starter Motor Fuses Located in the Toyota Yaris?
Toyota Yaris (1999-2005 / Xp10) In this video, you will see where the starter motor fuses are located in the Toyota Yaris, the first elements to check if it is malfunctioning. As sh…
How do you replace the starter motor of the Toyota Yaris?
How do you replace the starter motor of the Toyota Yaris?
Toyota Yaris (2005-2011 / Xp90) In order to replace the starter motor of the Toyota Yaris, you need to lift the car with a jack so that you can access the components located in the …

Other guides you may be interested in

How to Repair the Key Spring of the Peugeot 207?

Over time, frequent use of the key's flip mechanism in the vehicle, dozens of times a day, inevitably leads to wear of the internal spring. As shown in this video, replacing the spring is quite simple and takes little time. After opening the casing halfway, first position the key, then the spring housing, and finally insert the spring into the previously mentioned housing. Close the casing by rotating it clockwise, ensuring all components fit perfectly, and test the key's flip mechanism.

Watch the video!


by ScegliAuto

More videos