Do it yourself
Frequently asked questions about cars and motorcycles

Fuse layout and positioning for the Toyota Yaris

Model: Toyota Yaris Xp90 - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011
Part: Fuse box

See other generations:
Video tutorial

The information provided in this guide will allow you to access the fuse boxes of the Toyota Yaris, retrieving the layout and diagram. First, open the front passenger door and start lowering and removing the glove compartment; inside, you will find the fuse and relay box, as shown in the video.

Locate the external fuse box in the engine compartment by removing the cover located at the top right; in the vehicle's user manual, you will find tables containing the layout and diagram of all the fuses!


Posted on 6 October 2026 by ScegliAuto


Related tutorials

Toyota Yaris (2005-2011 / Xp90) This guide will show you the positioning and diagram of the fuses for the Toyota Yaris, in simple steps. First, open the bonnet of the vehicle and lo…
Toyota Yaris (2005-2011 / Xp90) In this guide, we will look at the location and diagram of the fuses for the Toyota Yaris, following the instructions below. First, get inside the ve…
Toyota Yaris (1999-2005 / Xp10) These brief and simple instructions will illustrate the positioning and layout of the fuses in the Toyota Yaris. First, open the driver's side front …
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.

Other guides you may be interested in

    Frequently Asked Questions

    • Yaris 2005-2011 - Where is the Toyota Yaris fuel pump relay located? Read answer

How to adjust the headlights in the Toyota RAV4?

In this tutorial, you can see how to adjust the headlights in the Toyota RAV4, a very simple and quick operation. First, position the vehicle in front of a wall, about 40 centimetres away, then switch on the headlights and open the bonnet. Next, locate the small hole on both headlamps, apply tape on the wall at the same height, and using the indicated adjustment ring, position the beam of light so that it is perpendicular to the tape. Finally, move the vehicle back and check that the beam falls below the tape; if not, lower it slightly.

Watch the video!


by ScegliAuto

More videos