Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing Fuel Pump with Float from Toyota Yaris

Model: Toyota Yaris Xp130 - Years: 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Engine

See other generations:
Video tutorial

In this tutorial video, you will learn how to remove the fuel pump with float from a Toyota Yaris. The float is located under the rear seats of the car: therefore, remove the rear seat by lifting it by hand.

Remove the cover of the filter by prying it with a sharp object and disconnect the electrical connector found on the pump. Next, disconnect the hoses, keeping a cloth nearby to absorb any remaining fuel; then unscrew the collar of the pump.

A specific tool designed for these types of objects is used in the video.


Updated on 27 March 2026 by ScegliAuto


Related tutorials

Removing the Fuel Pump from the Toyota Yaris
Toyota Yaris (2005-2011 / Xp90) In today's tutorial video, you will see the steps that will allow you to remove and replace the fuel pump or float of the Toyota Yaris. First, open t…
Replacing the Fuel Float on a Toyota Yaris
Replacing the Fuel Float on a Toyota Yaris
Toyota Yaris (2020-2026 / MK 4) Access the area beneath the rear seat, lift the adhesive tape securing the cables, and use a screwdriver to pry up the cover plate of the fuel pump c…
Removing the Fuel Pump Float on a Toyota Yaris
Removing the Fuel Pump Float on a Toyota Yaris
Toyota Yaris (2005-2011 / Xp90) Let’s look at removing the fuel pump float inside the tank of the Yaris. Disconnect the battery cables before removing any electrical components, the…

Other guides you may be interested in

How to Open the Hood of the BMW X3

Today, you will learn how to open and close the hood of the BMW X3. To perform this simple operation, lift the hood release lever located next to the door seal on the driver’s side. After pulling the lever, you will notice that the hood will lift slightly. Position yourself in front of the hood and lift it after moving the internal lever from left to right. To keep the hood secure during maintenance, use the side support rod. To close the hood, simply let it fall back into place.

Watch the video!


by ScegliAuto

More videos