Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to disassemble the front seat of the Toyota Yaris

Model: Toyota Yaris Xp90 - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011
Part: Seat

See other generations:
Video tutorial

Today we will discover the instructions that will allow us to disassemble and replace the front seat of the Toyota Yaris, in simple and quick steps. First of all, we open the front door of the car and start unscrewing all the fixing screws we find on the front seat rails; to access all the screws, we first move the seat forward and then backward, using a ratchet wrench, as shown in the video.

At this point, disconnect the electrical connector located under the front seat to remove it from the cabin, carrying out the repair or replacement!


Posted on 4 April 2025 by ScegliAuto


Related tutorials

Removing the Front Seat on a Toyota Yaris
Removing the Front Seat on a Toyota Yaris
Toyota Yaris (1999-2005 / Xp10) Do you need to remove the front seat to reupholster it or replace it? Here's how to remove the front seat from your Yaris. Move the seat back (using …
How to Remove the Front Seat from a Toyota Yaris
How to Remove the Front Seat from a Toyota Yaris
Toyota Yaris (1999-2005 / Xp10) To remove the front seat from a Toyota Yaris, loosen the screws that secure the seat to its base: these screws are located at the front and rear of t…
Removing the Front Seat on Toyota Yaris
Removing the Front Seat on Toyota Yaris
Toyota Yaris (1999-2005 / Xp10) This guide explains how to remove the front seat of a Toyota Yaris. Disconnect the power connectors (if present); move the seat back (using the elect…

How to Open the Hood of the BMW X3

Today, you will learn how to open and close the hood of the BMW X3. To perform this simple operation, lift the hood release lever located next to the door seal on the driver’s side. After pulling the lever, you will notice that the hood will lift slightly. Position yourself in front of the hood and lift it after moving the internal lever from left to right. To keep the hood secure during maintenance, use the side support rod. To close the hood, simply let it fall back into place.

Watch the video!


by ScegliAuto

More videos