Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Windscreen Washer Pump on a Toyota Yaris?

Model: Toyota Yaris Xp90 - Years 2005-2011
Part: Pump

To replace the windscreen washer pump on a Toyota Yaris, first remove the corresponding fuse from the box located under the glove compartment on the passenger side. Next, loosen all the screws inside the wheel arch of the right wheel and move the cover. Behind it, you will find the reservoir containing the washer fluid, to which the pump is connected. This can be removed after disconnecting the relevant cables and replaced with a new spare part. Once the replacement is complete, reassemble all the removed parts.

Updated on 30 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Windscreen Washer Pump on the Toyota Yaris
How to Replace the Windscreen Washer Pump on the Toyota Yaris
Toyota Yaris (2011-2019 / Xp130) In today's video, learn how to remove and disassemble the windscreen washer fluid reservoir on the Toyota Yaris. This specifically refers to the Amer…
Where are the Fuses in a Toyota Yaris?
Where are the Fuses in a Toyota Yaris?
Toyota Yaris (2005-2011 / Xp90) Any fuse in a Toyota Yaris is contained within one of the boxes installed in the vehicle: in this type of vehicle, you will find two boxes for the fu…
How to Top Up the Windscreen Washer Fluid in a Toyota Yaris
How to Top Up the Windscreen Washer Fluid in a Toyota Yaris
Toyota Yaris (2011-2019 / Xp130) Before you start, open the front bonnet of your Toyota Yaris. Begin by unclipping and removing the cap from the washer fluid reservoir, located in th…

Other guides you may be interested in

How to Repair the Key Spring of the Peugeot 207?

Over time, frequent use of the key's flip mechanism in the vehicle, dozens of times a day, inevitably leads to wear of the internal spring. As shown in this video, replacing the spring is quite simple and takes little time. After opening the casing halfway, first position the key, then the spring housing, and finally insert the spring into the previously mentioned housing. Close the casing by rotating it clockwise, ensuring all components fit perfectly, and test the key's flip mechanism.

Watch the video!


by ScegliAuto

More videos