Do it yourself
Frequently asked questions about cars and motorcycles

How to Change a Wheel on the Toyota Yaris GR?

Model: Toyota Yaris MK 4 - Years: 2020, 2021, 2022, 2023, 2024, 2025, 2026
Part: Wheel

See other generations:
Video tutorial

Changing a flat wheel on the Toyota Yaris GR is no different from performing the same operation on any other car. Proceed as you already know, and after gathering the tools you need and the spare wheel from the boot, start loosening the bolts that hold the damaged wheel in place, then position the jack and lift the car. Continue unscrewing the bolts until you can remove the wheel and replace it with the spare.

Now, start tightening the bolts by hand and only fully secure them after lowering the vehicle.


Posted on 28 August 2026 by ScegliAuto


Related tutorials

Toyota Yaris (2011-2019 / Xp130) Knowing where the spare wheel is stored in your car is essential for quick intervention in case a tyre punctures during your journey. DIY wheel repla…
Toyota Yaris (1999-2005 / Xp10) To replace the bearing on a Toyota Yaris, loosen the bolts securing the front wheel corresponding to the bearing to be replaced and remove it complet…
Toyota Yaris (2005-2011 / Xp90) Here are the instructions to remove and replace the rear wheel bearing of the Toyota Yaris, following these simple steps. First, lift the vehicle at …

How to Activate the Disabled TRC on the Toyota Yaris?

As the video clearly shows, disabling or activating the traction control (TRC or ESP) on the Toyota Yaris is very simple. By default, the traction system activates every time the vehicle is started. To disable it, simply press the button depicting a skidding car located in the centre of the vehicle where the controls are, such as the hazard lights and the radio, but near the handbrake. Once disabled, the TRC off light will illuminate on the dashboard. To reactivate it, just press the same button again.

Watch the video!


by ScegliAuto

More videos