Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Front Wheel Bearing on a Toyota Yaris?

Model: Toyota Yaris Xp10 - Years 1999-2005
Part: Bearing

To replace the bearing on a Toyota Yaris, loosen the bolts securing the front wheel corresponding to the bearing to be replaced and remove it completely. Once the wheel is removed, access the hub by detaching the brake disc after removing the caliper and the corresponding bolts. At this point, extract the old bearing from the centre of the wheel hub and replace it with a new spare part. After inserting the new bearing, remount the hub, securing the caliper, bolts, and the corresponding wheel.

Updated on 9 June 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing the rear wheel bearing on the Toyota Yaris 2 (XP90)
Replacing the rear wheel bearing on the Toyota Yaris 2 (XP90)
Toyota Yaris (2005-2011 / Xp90) In this video, see how to remove and replace the rear wheel bearing on the Toyota Yaris XP90, second generation, following the instructions below. Fi…
How to Replace the Rear Wheel Bearing of the Toyota Yaris
How to Replace the Rear Wheel Bearing of the Toyota Yaris
Toyota Yaris (2005-2011 / Xp90) Here are the instructions to remove and replace the rear wheel bearing of the Toyota Yaris, following these simple steps. First, lift the vehicle at …
How to Change the Rear Bearing on a 2005 Toyota Yaris
How to Change the Rear Bearing on a 2005 Toyota Yaris
Toyota Yaris (1999-2005 / Xp10) Replacing the rear hub bearing is straightforward as the bearing is sold complete with the hub; therefore, lift the vehicle, remove the wheel and bra…

Other guides you may be interested in

    Frequently Asked Questions

    • Yaris 2005-2011 - How long does it take to replace the Toyota Yaris rear wheel bearing? Read answer

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos