Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the rear wheel bearing on the Toyota Yaris 2 (XP90)

Model: Toyota Yaris Xp90 - Years 2005-2011
Part: Bearing

In this video, see how to remove and replace the rear wheel bearing on the Toyota Yaris XP90, second generation, following the instructions below. First, lift the vehicle and start by removing the rear brake drum; to do this, use two extractor bolts to remove the drum, as shown in the video. At this point, disconnect the electrical connector found at the back and unscrew the rear bolts; then extract the bearing and replace it with a new one, cleaning the inside of the housing. Optionally, also replace the rear brake shoes!

Updated on 29 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Rear Wheel Bearing of the Toyota Yaris
How to Replace the Rear Wheel Bearing of the Toyota Yaris
Toyota Yaris (2005-2011 / Xp90) Here are the instructions to remove and replace the rear wheel bearing of the Toyota Yaris, following these simple steps. First, lift the vehicle at …
How to Remove the Rear Bearing from a Toyota Yaris
Toyota Yaris (2005-2011 / Xp90) In this video, see how to remove the rear bearing from a Toyota Yaris. Position your car on a column lift, loosen the bolts with a socket wrench, and…
How to Replace the Front Wheel Bearing on a Toyota Yaris?
How to Replace the Front Wheel Bearing on a Toyota Yaris?
Toyota Yaris (1999-2005 / Xp10) To replace the bearing on a Toyota Yaris, loosen the bolts securing the front wheel corresponding to the bearing to be replaced and remove it complet…

Other guides you may be interested in

    Frequently Asked Questions

    • Yaris 2005-2011 - How long does it take to replace the Toyota Yaris rear wheel bearing? Read answer

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos