Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions

How to remove the rear bearing of a Toyota Yaris

Model: Toyota Yaris Xp90 - Years 2005-2011
Part: Bearing

Let's see in this video how to remove the rear bearing of a Toyota Yaris. We place our car on a column bridge, loosen the pins with a telescopic wrench and lift it to a preferred height to intervene. We unscrew the pins and slide out the circle. We begin to unscrew the pins of the caliper support and detach it away. Unscrew the brake disc pins and detach it from the wheel hub, then, pull off the central hub cap. We loosen the maxi bolt with a suitable socket wrench and remove the piece away. We disassemble the wheel hub of the car with the upper pin and remove the bearing with the ABS sensor.


Posted on 18 November 2023 by ScegliAuto

This video is currently unavailable


How to replace rear wheel bearing on Toyota Yaris
Toyota Yaris (2005-2011 / Xp90) We will see below the instructions which will allow us to disassemble and replace the rear wheel bearing of the Toyota Yaris, by following these simp
Replacing the rear wheel bearing on Toyota Yaris 2 (XP90)
Toyota Yaris (2005-2011 / Xp90) Let's see in this video how to remove and replace the rear wheel bearing on Toyota Yaris XP90, second generation, following the instructions below. F
How do you replace the front wheel bearing on Toyota Yaris?
Toyota Yaris (1999-2005 / Xp10) In order to replace the bearing of the Toyota Yaris it is necessary to loosen the bolts that fix the front wheel corresponding to the bearing to be r

How to deactivate the safe lock on a Volkswagen Golf.

The safe lock is indeed an anti-theft system that prevents thieves from accessing the car. This device locks the doors, both externally and internally, when the driver activates the central locking remote control after leaving the vehicle. To permanently disable it, it is necessary to use a diagnostic program such as VCDS that we will connect to the vehicle through the ODBII port. Then wait for the connection and recognition of the control unit and then select the blocks present and locate the safe lock to disable it. And the job will be completed.

Watch the video!


by ScegliAuto

More videos