Do it yourself
Frequently asked questions about cars and motorcycles

Removing Fuel Pump from Toyota Yaris

Model: Toyota Yaris Xp90 - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011
Part: Pump

See other generations:
Video tutorial

In today's tutorial video, you will learn how to remove the fuel pump from a Toyota Yaris. First, remove the rear seat as the pump is located right underneath: remove the protective cover and disconnect the electrical connector of the pump and then the two fuel hoses, using a cloth to catch any possible spillage.

Next, unscrew the collar of the pump; there are two methods: use the specific collar tool available commercially or use two screwdrivers hitting them in opposite directions. Once unscrewed, extract the pump and replace it.


Updated on 27 March 2026 by ScegliAuto


Related tutorials

Toyota Yaris (2005-2011 / Xp90) In today's tutorial video, you will see the steps that will allow you to remove and replace the fuel pump or float of the Toyota Yaris. First, open t…
Toyota Yaris (1999-2005 / Xp10) Today we will see how to remove and replace the fuel pump of a first series 1.0 Petrol Toyota Yaris. First, recline the front seats and the rear seat…
Toyota Yaris (2011-2019 / Xp130) In this tutorial video, you will learn how to remove the fuel pump with float from a Toyota Yaris. The float is located under the rear seats of the c…
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.

Other guides you may be interested in

Resetting the Service Light on the Mitsubishi Canter

When it is necessary to change the engine oil of the Mitsubishi Canter, a warning on the dashboard alerts us to this requirement. Once this maintenance task is completed, you must reset the control system. Sit in the driver's seat and turn on the instrument panel. Without starting the engine, press and hold the accelerator pedal for twenty seconds. After this time interval, while still holding the accelerator pedal, pump the brake pedal six times. Once done, the warning on the instrument panel will turn off, confirming the reset.

Watch the video!


by ScegliAuto

More videos