Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Toyota
    3. :
  3. Yaris
    4. : Toyota Yaris fuel pump disassembly

Toyota Yaris - Video tutorial

Model: Toyota Yaris Xp90 - Years 2005-2011
Part: Fuel pump
Operation: Toyota Yaris fuel pump disassembly

In today's video tutorial we will see the steps that will allow us to disassemble and replace the fuel pump or float on the Toyota Yaris. First of all, open the rear doors and start disassembling the rear bench, pulling it upwards; then we remove the fuel pump cover, as shown in the video. At this point we disconnect the supply line and the electrical connector of the fuel level sensor; unscrew the ring nut with the appropriate key and remove the fuel pump. We just have to install the new original fuel pump!


Posted on 19 December 2022 by ScegliAuto

This video is currently unavailable

Other guides that may interest you

    Frequently Asked Questions

    • Yaris 2020-2027 - What is the price for the Toyota Yaris fuel pump? Read Answer
    • Yaris 2005-2011 - Where is the fuel pump located on Toyota Yaris? Read Answer
    • Yaris 2005-2011 - Where is the fuel pump relay located in the Toyota Yaris? Read Answer
    • Yaris 2005-2011 - Why does not gasoline reach the Toyota Yaris engine? Read Answer
    • Yaris 2011-2019 - Where can I find the inertia switch on the Toyota Yaris? Read Answer
    • Yaris 2011-2019 - How to disassemble the float of the petrol pump in the Toyota Yaris? Read Answer
    • Yaris 2005-2011 - Where is Toyota Yaris fuel pump located? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos