Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Fuel Pump from a Toyota Yaris

Model: Toyota Yaris Xp90 - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011
Part: Fuel pump

See other generations:
Video tutorial

Before starting, open the rear doors of your Toyota Yaris. Begin by unclipping and removing the covers of the fixing bolts for the rear seat bench, then unscrew and remove the underlying bolts.

Next, unclip and remove the rear seat bench itself, and you will reach the upper cover of the fuel pump. Proceed by unclipping and removing the cover, then disconnect the electrical connector.

At this point, disconnect the hoses connected to the fuel pump, and then unscrew the securing ring. Once you have completed this last step, you can extract the pump from its housing, and the removal will be finished.


Updated on 10 April 2026 by ScegliAuto


Related tutorials

Removing the Fuel Pump from the Toyota Yaris
Toyota Yaris (2005-2011 / Xp90) In today's tutorial video, you will see the steps that will allow you to remove and replace the fuel pump or float of the Toyota Yaris. First, open t…
Removing Fuel Pump from Toyota Yaris
Removing Fuel Pump from Toyota Yaris
Toyota Yaris (2005-2011 / Xp90) .. In today's tutorial video, you will learn how to remove the fuel pump from a Toyota Yaris. First, remove the rear seat as the pump is located right.. …
Removing the Fuel Pump from a Toyota Yaris 1.0 Petrol
Removing the Fuel Pump from a Toyota Yaris 1.0 Petrol
Toyota Yaris (1999-2005 / Xp10) Today we will see how to remove and replace the fuel pump of a first series 1.0 Petrol Toyota Yaris. First, recline the front seats and the rear seat…

Other guides you may be interested in

    Frequently Asked Questions

    • Yaris 2005-2011 - Where is the fuel pump relay located in the Toyota Yaris? Read answer

How to Open the Hood of the BMW X3

Today, you will learn how to open and close the hood of the BMW X3. To perform this simple operation, lift the hood release lever located next to the door seal on the driver’s side. After pulling the lever, you will notice that the hood will lift slightly. Position yourself in front of the hood and lift it after moving the internal lever from left to right. To keep the hood secure during maintenance, use the side support rod. To close the hood, simply let it fall back into place.

Watch the video!


by ScegliAuto

More videos