Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Water Pump on a Toyota Yaris

Model: Toyota Yaris Xp10 - Years: 1999, 2000, 2001, 2002, 2003, 2004, 2005
Part: Pump

See other generations:
Video tutorial

If you want to replace the water pump on this car model, the following description provides the necessary information and steps for disassembly, and you can also check the images in the video. First, drain the coolant and then open the filler cap. Next, remove the four screws securing the alternator pulley and loosen the tensioner of the auxiliary belt to remove the belt itself.

Then unscrew the bolts securing the water pump pulley, and beneath it, you will find the screws securing the water pump. This way, you can remove the pump and complete the job.


Updated on 20 July 2026 by ScegliAuto


Related tutorials

How to Remove and Replace the Timing Chain on a Toyota Yaris 1.4 D4D
How to Remove and Replace the Timing Chain on a Toyota Yaris 1.4 D4D
Toyota Yaris (2005-2011 / Xp90) This video tutorial teaches you how to remove and replace the timing chain on a Toyota Yaris 1.4 D4D. This operation requires a new timing chain kit,…
How to Replace the Water Pump on a Toyota Yaris
How to Replace the Water Pump on a Toyota Yaris
Toyota Yaris (2005-2011 / Xp90) To access the water pump, you will need to lift the bonnet and remove the panel covering the lower part of the belt. It will be more convenient to wo…
How to Replace the Dipped Beam Bulb on a Toyota Yaris
How to Replace the Dipped Beam Bulb on a Toyota Yaris
Toyota Yaris (2005-2011 / Xp90) This short video tutorial shows how to change the dipped beam bulb on a second-generation Toyota Yaris, produced from 2005 to 2011. First, open the b…

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos