Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the alternator in the Toyota Yaris?

Model: Toyota Yaris Xp90 - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011
Part: Alternator

See other generations:
Video tutorial

In this tutorial we can see how to replace the alternator in the Toyota Yaris, an extremely simple and quick operation. First of all, make sure that the key is not inserted, in order to operate safely, then open the hood and disconnect the negative terminal of the battery.

Next, disconnect both power poles of the alternator, unscrew the respective fixing bolts with a socket wrench and remove it from the support. At this point, all that remains is to position the replacement and reassemble everything following the reverse procedure, also taking care to tension the belt.


Posted on 8 March 2025 by ScegliAuto


Related tutorials

How to Replace the Alternator Belt on a Toyota Yaris
How to Replace the Alternator Belt on a Toyota Yaris
Toyota Yaris (1999-2005 / Xp10) To replace the alternator belt on a Toyota Yaris, start by loosening the alternator bolts with a 12mm spanner; once the 3 bolts are loosened, slightl…
How to Replace the Timing Belt on a Toyota Yaris
How to Replace the Timing Belt on a Toyota Yaris
Toyota Yaris (2005-2011 / Xp90) In this video tutorial, you can see how to replace the timing belt on a Toyota Yaris. If you notice that the timing belt is worn, replace it before i…
How to Replace the Auxiliary Belt in a Toyota Yaris?
How to Replace the Auxiliary Belt in a Toyota Yaris?
Toyota Yaris (1999-2005 / Xp10) In this tutorial, you will learn how to replace the auxiliary belt in a Toyota Yaris, a relatively simple operation but one that requires good manual…

Other guides you may be interested in

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos