Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Auxiliary Belt in a Toyota Yaris?

Model: Toyota Yaris Xp10 - Years: 1999, 2000, 2001, 2002, 2003, 2004, 2005
Part: V-belt

See other generations:
Video tutorial

In this tutorial, you will learn how to replace the auxiliary belt in a Toyota Yaris, a relatively simple operation but one that requires good manual skills. First, wait for the engine to cool down, then open the bonnet, mark the current position of the alternator, and slightly loosen the corresponding bolt.

Next, move the device towards the rear of the vehicle, detach the old belt, and remove it from the lower pulley. Once done, insert the replacement, return the alternator to its initial position, and tighten the fixing bolt.


Updated on 28 June 2026 by ScegliAuto


Related tutorials

How to Replace the Auxiliary Belt on a Toyota Yaris
How to Replace the Auxiliary Belt on a Toyota Yaris
Toyota Yaris (1999-2005 / Xp10) Before you begin, open the bonnet to allow access to the engine. Start by loosening and removing the tensioner bolt. Next, to gain better access to t…
How to Replace the Serpentine Belt on a Toyota Yaris
How to Replace the Serpentine Belt on a Toyota Yaris
Toyota Yaris (1999-2005 / Xp10) The following instructions will show you the step-by-step procedure for removing and replacing the serpentine or poly V belt on a Toyota Yaris. First…
How to Replace the Serpentine Belt on the Toyota Yaris VVT-I
How to Replace the Serpentine Belt on the Toyota Yaris VVT-I
Toyota Yaris (2005-2011 / Xp90) Today's video will show you the main steps for removing and replacing the serpentine belt on the Toyota Yaris VVT-I. First, open the bonnet and start…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos