Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Toyota
  4. :
  5. Yaris
  6. : V-belt

Toyota Yaris - V-belt

Toyota Yaris (1999-2005 / Xp10)
How to replace the alternator belt of the Toyota Yaris

To replace the alternator belt of the Toyota Yaris, we begin by loosening the alternator bolts with a 12mm wrench. Once the 3 bolts are loosened, we slightly …read all…
Posted on 30 October 2023 by ScegliAuto
Toyota Yaris (2005-2011 / Xp90)
How to replace the serpentine belt on Toyota Yaris

Today's guide will show us the main steps to disassemble and replace the serpentine or V-belt of the Toyota Yaris. First of all, we open the bonnet of our car …read all…
Posted on 2 June 2023 by ScegliAuto
Toyota Yaris (1999-2005 / Xp10)
How to replace the lap belt in Toyota Yaris?

In this tutorial we can see how to replace the timing belt in the Toyota Yaris, a simple operation that requires good manual skills. First of all, we wait for …read all…
Posted on 7 December 2022 by ScegliAuto
Toyota Yaris (1999-2005 / Xp10)
How to replace the service belt of a Toyota Yaris

Before we can begin, in order for us to be able to work on the engine, we will have to open the hood. Let's start by unscrewing and loosening the belt …read all…
Posted on 18 February 2024 by ScegliAuto
Toyota Yaris (1999-2005 / Xp10)
Replacement alternator belt on Toyota Yaris

Open the hood and put on the special support rod. Loosen the tensioner arm of the poly v belt, as shown in the video, by unscrewing the screw. Now that the …read all…
Posted on 5 January 2024 by ScegliAuto

Cigarette Lighter (2) Airbags (3) Alternator (1) Shock absorbers (3) Air conditioning (5) Car stereo (34) Anti roll bar (2) Roof Rack Bars (1) Battery (29) Coil (1) Bushings (2) Arm (1) Gearbox (4) Spark plugs (18) Bodywork (3) Wheel rim (1) Key (28) Timing belt (18) V-belt (5) Air conditioning (1) Air conditioning controls (1) -board computer (27) Checks and maintenance (151) Dashboard (4) Gearshift gaiter (1) Bearing (8) Brake discs (3) Side indicator light (1) Headlight (22) Tail light (12) Fog lights (1) Air filter (19) Cabin air filter (23) Petrol filter (1) Diesel filter (5) Oil filter (4) Hand brake (2) Clutch (6) Injectors (1) Accessory Kit (6) Light bulb (9) Headlight bulb (29) Rear light bulb (15) Interior lights ceiling light bulb (9) Antifreeze liquid (8) License plate light (12) Third brake light (4) Handle (2) Muffler (2) Engine (3) Window motor (5) Starter motor (8) Gear oil (3) Engine oil (16) Door panel (25) Front bumper (9) Rear bumper (3) Brake pads (12) Hydraulic pistons (1) Tires (16) Gear Shift Knob (12) Pump (5) Fuel pump (16) Door (1) Instrument cluster (28) Radiator (2) Passenger compartment heating radiator (1) Wheel (3) Fuse box (81) Seat (15) Crankshaft RPM sensor (1) Parking sensors (2) Lock (2) Lambda sensor (1) Suspensions (2) Outside rearview mirror (13) Drums and shoes (4) Windscreen wipers (25) Thermostat (3) Transmission (1) Central tunnel (1) Windshield washer nozzle (1) Valve (1) EGR valve (2) Interior blower (2) Steering wheel (4)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos